Carbon filament for 3D printers
3D printing with carbon filament creates extremely stiff and durable models.
Most filaments like PLA, ABS, PETG or nylon are reinforced with carbon fibers. Disadvantage of the carbon filament is increased wear of the nozzle. A hardened or coated nozzle is recommended for use.
-
Fiberlogy Nylon PA12 + CF15, 1.75 mm / 500 g
- Reinforced with carbon fibres
- High tensile strength
- High rigidity
-
-
Polymaker PolyMide PA6-CF Black, 1.75 mm / 500 g
- Excellent thermal properties
- High mechanical resistance
- Good layer adhesion
-
Fillamentum Nylon CF15 Carbon, 2.85 mm (600 g)
- High strength
- High thermal resistance
- High chemical resistance
-
eSUN ePA12-CF Natural, 1.75mm / 1000g
- Low moisture absorption
- High strength & toughness
- Temperature resistant
-
Polymaker PolyMide PA612-CF Black, 1.75 mm (500 g)
- With carbon fibres
- Based on PA6 & PA12
- Insensitive to moisture
-
Extrudr Green-TEC PRO Carbon, 1.75 mm / 800 g
- Fibre-reinforced BIO material
- Exceptional mechanical properties
- High thermal resistance up to 165 °C
-
R3D Carbon Black, 1.75 mm / 800 g
- Superior rigidity
- Improved dimensional stability
- High UV resistance
-
Fillamentum CPE CF112 Carbon, 2.85 mm (600 g)
- Long-term stability
- Chemical resistance
- High durability
-
Formfutura CarbonFil™ Black, 1.75 mm / 500 g
- High impact strength
- Unique mix
- Excellent viscoelasticity
-
Spectrum Carbon PETG, 1.75mm / 1000g
- Increased stiffness, hardness & tensile strength
- Matt surface
- Low shrinkage
-
Fiberlogy PCTG+CF Black, 1,75 mm / 750 g
- With 10% carbon fibre
- Carbon finish
- High rigidity & tensile strength
-
Nobufil PETG CF Black, 1,75 mm / 1000 g
- Made from recycled industrial waste
- Very good resistance to chemicals
- High rigidity & strength
-
Polymaker PolyLite PLA-CF Black, 1.75 mm / 1000 g
- With PLA properties
- Reinforced with carbon fibres
-
eSUN ePLA-CF Red, 1.75 mm / 1000 g
- Reinforced with carbon fibre
- High strength
- Matt surfaces & sandblasted texture
-
colorFabb PA-CF, 1.75 mm (700 g)
- Special polyamide formula
- Nearly without warping
- Carbon fibre content
-
Carbon Cleanup Carbo3D PETG15, 1,75 mm / 750 g
- With 15% recycled carbon fibers
- Low CO₂ footprint
- High strength & rigidity
-
AddNorth Rigid X Black, 1.75 mm / 1000 g
- Carbon fibre reinforced PETG
- Chemical, heat and UV resistance
- Perfect for vehicle parts
-
eSUN ePLA-CF Brown, 1.75 mm / 1000 g
- Reinforced with carbon fibre
- High strength
- Matt surfaces & sandblasted texture
-
Polymaker Polymide PA12-CF Black, 1.75 mm / 500 g
- Excellent mechanical properties
- High thermal resistance
- Carbon fibre reinforced
-
Protopasta Carbon Fibre Composite PLA, 1,75 mm / 500 g
- With carbon fibres
- Easy to print
- High rigidity
-
Protopasta Black Carbon Fibre HTPLA, 1,75 mm / 500 g
- With milled carbon fibres
- High rigidity & low flexibility
- Matt black finish with a slight shine
-
AddNorth Adura X Black, 1.75 mm / 500 g
- Carbon fibre reinforced nylon
- Strong prints for heavy-duty applications
- Excellent surface finish
-
Creality Hyper PLA-CF Ochre, 1.75 mm / 1000 g
- High strength & layer adhesion
- Printing speed up to 300 mm/s
- Low shrinkage & deformation resistance
All prices excl. VAT.
Magazine Articles:
Discover 3DJake:
More than 9.800 products
We deliver worldwide to
more than 40 countriesSecure payments
with SLL encryption technology
