DIAMANT Polymer dichtol AM Makro Spray, 500 ml

Name: DIAMANT Polymer dichtol AM Makro Spray, 500 ml
Brand: DIAMANT Polymer
SKU: DIA-2570
Price: 39.99 EUR
Availability: InStock
Rating: 5 (2 reviews)

Polymer formulation for impregnation of leaky components & large pores

2 Customer Ratings

Version:

Features & Advantages

Practical spray can
Special polymer formulation
Seals large pores
High pressure tightness
Temporary protection from corrosion & during transport

Item no.: DIA-2570, Content: 500 ml, EAN: 4262367790109

Product information & technical details

Item no.: DIA-2570
Manufacturer No.: 2570
Manufacturer: DIAMANT Polymer
Content: 500 ml
Product type: 3D Printer Accessories, Post-processing

Description

The dichtol AM Makro Spray is a ready-to-use product with a special polymer formulation that reliably impregnates leaking components and seals large pores of size 0.1 to 0.5 mm. It exhibits high pressure resistance and provides temporary protection from corrosion or during transport.

Suitable for:

capillary-active deep impregnation of micropores, hairline cracks and porosities,
targeted serial impregnation,
single-point impregnation of large components,

Preparation and application:

Before application, the pores to be sealed must be thoroughly cleaned of dirt residues and other undesirable substances.

Apply the dichtol AM Macro Spray four times at 1-minute intervals and keep it moist for at least 5 minutes to allow the product to penetrate the pores deeply. Note that the temperature of the object to be impregnated should not exceed 40°C. The penetration of the polymer cannot be guaranteed at higher temperatures.

The impregnating agent dries completely in a few hours, thus the treated components can be used after a short period of time.

Storage: Store the unopened product in a cool and dry place (+5°C to +20°C).

Shelf life: 5 years.

Hazard and precautionary statements

Signal word: Danger

Precautionary statements:

P210 - Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P211 - Do not spray on an open flame or other ignition source.
P233 - Keep container tightly closed.
P251 - Do not pierce or burn, even after use.
P261 - Avoid breathing dust/fume/gas/mist/vapours/spray.
P271 - Use only outdoors or in a well-ventilated area.
P280 - Wear protective gloves/protective clothing/eye protection/face protection.
P310 - Contact your doctor/poison control centre immediately.
P312 - Call a POISON CENTRE/doctor if you feel unwell.
P304+P340 - IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P305+P351+P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P308+P313 - IF exposed or concerned: Get medical advice/ attention.
P501 - Dispose of contents/container at an industrial incineration plant.